Premium Stainless Steel Water Baths - Factory Direct Prices

Product Description

Stainless Steel Laboratory Water Bath

Use This electric constant temperature water bathisfor evaporation, drying, concentration, constant temperature heating test of productsincolleges and universities, scientific research departments and production units. Characteristics 1.the chamber is made ofhigh quality cold-rolled steel plate and refined, the surface electrostatic spraying, modelling is novel, artistic. 2.The inner container and the top cover adopts high quality stainless steel,corrosion resistance to ageing, long service life. 3.immersion U heating pipe direct heating, small heat loss, and the speed of temperature rise quickly. 4.Temperature controladopts specialmeter, theprecision is high. 1、the instrument should be placed on a smooth surface. 2、Add the water to the shelves more than 50mm, (best to use distilled water) shall not be empty burn or water shortages. 3、Power-on, turn on the switch. Press the SET button, the red screen display "SP" character, thesingle digit onthe green screen starts flashing that mean the meter goesinto the temperature setting state.press△key settingvalueincrease, press ▽key settingvaluedecreases.Long press △or ▽keydata will quickly change. Set temperature to determine and then press the SET button to return to normalwork state, the temperature setting is completed. the equipment will control the temperature automaticallyby setting temperature. 4、After use, remove the drain plug in the front of the equipment dischargethe water and wipe clean. Notes 1、must be used theconsistent power with the equipment requirements, the power outlet socket should be a three-hole safety, must be installed on the ground. 2、When injectingthe wateror using,don’t splash into the electrical box to prevent dangerous accidents 3、When working,do not touch the U-shaped heating tube, to prevent burns. 4、When using the equipment,must inject the waterfirst then power on.Don’tdry burningor lack of waterto prevent heating pipe damaged and dangerous occurrences. 5、After use, to be water-cooled and then drain the water, and wipe clean to protect the heating tube and prevent scaling. Keep the equipmentclean and dry, and to facilitate the extension of its service life.

Model Specs

Single hole DZKW-D-1

Double holes DZKW-D-2

One line four holes DZKW-D-4

One line six holes DZKW-D-6

Double line four holes DZKW-S-4

Double line six holes DZKW-S-6

Double line eight holes DZKW-S-8

Ratedpower（W）

300

500

1000